NEW 16CM UPGRADE non-wastegated (short*) TURBINE HOUSING FOR 88-2002 DODGE/CUMMINS For H1, HX model Holset turbos This is a simple and inexpensive upgrade that provides a lot of performance for your dollar. By replacing the 21cm2 or 18cm2 on your truck, you will increase boost, low end performance as well as horsepower on your stock 1988-1993 truck. This is a simple bolt on change. No modifications are required. You can also install this housing on 1994-2002 HX35W equipped trucks to replace the wastegated turine housing that comes stock BUT it will require moving the downpipe just over an inch forward. This housing will reduce backpressure and should repduce exhaust temperatures on these trucks. *When installing this housing on 99 and newer HX35W trucks, you should purchase the angled exhaust outlet adapter supplied by Cummins in order to ease installation.* This housing WON'T fit 2000 and newer automatic transmission trucks because they use a Holset HY35 turbo and not the HX35. Specify the application you want to use this housing on and ask up about mounting flange and oil drain gaskets. Price: $195.00
	NEW 14CM UPGRADE wastegated TURBINE HOUSING FOR 88-2002 DODGE/CUMMINS For H1, HX model Holset turbos By replacing the 12cm2 housing on your 94-2002 truck, this simple performance upgrade turbine housing will increase horsepower potential. You can also install this housing on 1988-93 trucks BUT it will require moving the downpipe just over an inch rearward. This housing will reduce backpressure and should reduce exhaust temperatures on these trucks. This housing WON'T fit 2000 and newer automatic transmission trucks because they use a Holset HY35 turbo and not the HX35. Specify the application you want to use this housing on and ask us about mounting flange and oil drain gaskets. Price: $480.00
	NEW 14CM UPGRADE non-wastegated (long*) TURBINE HOUSING FOR 88-2002 DODGE/CUMMINS For H1, HX model Holset turbos This is a simple and inexpensive upgrade that provides a lot of performance for your dollar. By replacing the 12cm2 on your truck, you should realize reduced backpressure, lower exhaust temperatures and increase horsepower potential. This is a simple bolt-on change. No modifications are required. You can use this housing on your stock 1988-1993 truck also. On these applications it will increase horsepower and boost BUT you must move the downpipe rearward just over an inch. *When installing this housing on 99 and newer HX35W trucks, you should purchase the angled exhaust outlet adapter supplied by Cummins in order to ease installation.* This housing WON'T fit 2000 and newer automatic transmission trucks because they use a Holset HY35 turbo instead of the HX35. Specify the application you want to use this housing on and ask us about mounting flange and oil drain gaskets. Price: $195.00
	NEW 12CM UPGRADE wastegated TURBINE HOUSING FOR 88-2002 DODGE/CUMMINS For H1, HX model Holset turbos By replacing the 18cm2 or 21cm2 housing on your 1988-93 trucks, you will increase spool-up and gain boost BUT it will require moving the downpipe just over an inch rearward. This housing WON'T fit 2000 and newer automatic transmission trucks because they use a Holset HY35 turbo and not the HX35. Specify the application you want to use this housing on and ask us about mounting flange and oil drain gaskets. Price: $480.00
	NEW 12CM UPGRADE (long*) non-wastegated TURBINE HOUSING FOR 88-2002 DODGE/CUMMINS For H1, HX model Holset turbos This is a simple and inexpensive alternative to wastegated turbine housings that should provide a lot of performance for your dollar. It will increase boost and low-end performance on your stock 1988-1993 truck BUT you must move the downpipe rearward just over an inch. *When installing this housing on 99 and newer HX35W trucks, you should purchase the angled exhaust outlet adapter supplied by us in order to ease installation.* This housing WON'T fit 2000 and newer automatic transmission trucks because they use a Holset HY35 turbo instead of the HX35. Specify the application you want to use this housing on and ask us about mounting flange and oil drain gaskets. Price: $195.00
	NEW 12CM UPGRADE (short*) non-wastegated TURBINE HOUSING FOR 88-2002 DODGE/CUMMINS For H1, HX model Holset turbos This is a simple and inexpensive alternative to wastegated turbine housings that should provide a lot of performance for your dollar. It will increase boost and low-end performance on your stock 1988-1993 truck. *When installing this housing on 99 and newer HX35W trucks, you should purchase the angled exhaust outlet adapter supplied by us in order to ease installation.* This housing WON'T fit 2000 and newer automatic transmission trucks because they use a Holset HY35 turbo instead of the HX35. Specify the application you want to use this housing on and ask us about mounting flange and oil drain gaskets. Price: $195.00
	Angled exhaust outlet adapter w/ clamp to use non-wastegated housing on 98-2002 trucks Price: $135.00
	Need Gaskets with your housing? Gasket kit includes: Turbine inlet, oil drain and inlet O-ring Price: $7.50
	***"Long" and "Short" refer to the length of housing outlet. The long non-wastegated housings match the length of wastegated housings. The short non-wastegated housings match the length of the 21cm2, 18cm2 and 16cm2 H1c non-wastegated turbos.***

Home | Specials | Shopping | Service | Winners Circle | Locate Dealer
Education Center | Contact Us