High Tech Turbo

HIGH TECH TURBO - Ford

	The Big Bad Wolf 7.3 Ford Powerstroke Performance Turbo for Late 99 - 03 Drop-in replacement FEATURES: Ported shroud compressor housing for flow increases exceeding 30%. The 88mm compressor wheel provides similar flow to the Garrett* ball-bearing turbo. 1.00 T. Hsg. instead of the stock .84. (For lower drive pressures and extended top-end horsepower.) The baseline actuator setting is 20 lbs. and is fully adjustable. 360 degree thrust bearing and a shaft shank diameter of 5/16" in diameter instead of original 1/4". This gives you the strength and durability you need. With the proper intake, exhaust and fuel mods, this turbo should reduce EGT's on hard pulls as compared with stock. As a turbocharger remanufacturer, the best thing about this turbo is that it cost much less down the road when it comes to repairs. With this turbo you get the air you need as well as decent spool-up. Price is $1700 with intake hose and clamp.* (We require a $150.00 refundable core deposit. Late 99-2003 cores and ball-bearing turbo cores are acceptable.) A large, free flowing exhaust must be used in conjunctuon with this turbo. Make sure your pyrometer probe is placed before the turbo.
	Large ported shroud compressor with a 88mm compressor for flow increase of exceeding 30%. 1.00 T. Hsg. instead of the stock .84. (For lower drive pressures and extended top-end horsepower.) Special Order, Please Call for Price
	1.00 wastegated turbine housing option for your stock late 99-2003 7.3 - $260.00
	*Performance aftermarket Powerstroke* compressor wheels to minimize midrange noise and surge on 7.3 liter 99-2003 Ford. Similarly known as "Wicked Wheels", these wheels feature a "lowered vane" design which increases and improves flow throughout the rpm ranges. Customers tell us that these wheels not only reduce surge and improve all around performance, they also help lower EGT's $140.00**
	*Performance aftermarket Powerstroke* actuators The High Tech Slim-line actuator features a spring supporting 20 lb more pressure than stock. Early 99 7.3 $180.00 Late 99-2003 7.3 $180.00**
	*Performance aftermarket Powerstroke* turbine housings for your 95-97 These housings are relatively easy to change. (And since the turbine housing bolts often come loose on these turbos, it gives you an opportunity to head off more major problems before they occur.) Your stock turbo is probably equipped with a 1.15 A/R turbine housing. A 1.00 A/R housing will improve bottom-end response and increase boost. $150.00 A .84 non-wastegated housing is also available that will give you even more of the above benefits but it will create more exhaust restriction and reduce ultimate horsepower potential at the top end of your RPM ranges. But if you your main concern is simply low-end performance then this option is available for only $150.00.**
Need repair parts? Check our parts page or contact us with your needs.